6 Electro – Magnetic Compatibility Information
6.1 Electro-Magnetic Emissions
This EUT is intended for use in the electromagnetic environment as specified below.
The customer or the user of the EUT should ensure that it is used in such an environment.
RF Emissions CISPR 11 – Group 1
The EUT uses RF energy only for its internal functions.
Therefore, its RF emissions are very low and are not likely to cause any interference in
nearby electronic equipment.
RF Emissions CISPR 11 – Class A
The EUT is suitable for use in all establishments, including domestic establishments and
those directly connected to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Immunity Test
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
Flicker emissions
6.2 Electro-Magnetic Immunity
This EUT is intended for use in the electromagnetic environment as specified below.
The customer or the user of the i500 system should ensure that it is used in such an
environment.
Electrostatic discharge (ESD) IEC 61000-4-2
Floors should be of wood, concrete or ceramic tiles. If floors are covered with a synthetic
material, the relative humidity should be at least 30%.
Compliance
The EUT is suitable for use in all establishments,
including domestic establishments and those
A
directly connected to the public low-voltage
power supply network that supplies buildings
The EUT is suitable for use in all establishments,
including domestic establishments and those
Complies
directly connected to the public low-voltage
power supply network that supplies buildings
Electromagnetic
Environment - Guidance
used for domestic purposes.
used for domestic purposes.
Intraoral Scanner i500
19