Trevi TT 1068 E Manual De Usuario página 12

ENGLISH
Connection
1. Connect external power adaptor to external power adaptor jack
2. Push the power knob to switch on the unit, standby indicator (red color) will be off. if the backlight on the lcd display lights up, it means the power
supply is normal, now your system is ready for use.
Setting The Clock
1 When the standby indicator (red color) light up, unit is in the standby mode.
2 During standby mode, select between 12h or 24h mode: press and hold mode button for 3-5 secondss, 12h / 24h will be flashing. Turning skip
up or skip down knob to select 12h / 24h mode. Press mode button again to confirm.
3 Setting hour: turning skip up or skip down knob to select the correct hour, then press mode button again to confirm.
4 Setting minute: after step 3 is completed, turning skip up or skip down knob to select the correct minute, then press mode button again to confirm.
Setting Alarm
1. During standby mode, hold timer button for 3-5 seconds. Setting alarm sequence is "alarm on time > alarm off time > alarm mode > alarm
volume".
2. Setting alarm on time: "on" is lighting on the display
I. Setting hour: turning skip up or skip down knob to select the correct hour, then press timer button again to confirm.
Ii. Setting minute: turning skip up or skip down knob to select the correct minute, then press timer button again to confirm.
3. Setting alarm off time: "off" is lighting on the display:
I. Setting hour: turning skip up or skip down knob to select the correct hour, then press timer button again to confirm.
Ii. Setting minute: turning skip up or skip down knob to select the correct minute, then press timer button again to confirm.
4. Setting alarm mode: "tune" is lighting up on the display:
I. Turning skip up or skip down knob to select the alarm mode.
Ii. Sequence is tune > cd > usb > sd, press timer button again to confirm.
5. Setting alarm volume: "v - " is lighting up on the display:
I. Turning skip up or skip down knob to select the alarm volume, press timer button again to confirm.
6. Setting alarm is completed, the display will show the setting again for user's checking
7. "Clock" icon is flashing when alarm is in active. "Clock" icon lights up when alarm is setting is stored but not in active yet.
8. Cancel alarm: during standby mode, when "clock" icon is on, press timer button, "clock" icon will be off.
Snooze Function
Press "snooze" button on the remote control when alarm in active, alarm will be slient for 10 minutes. After 9-10 minutue snooze interval, alarm will
be active again. Snooze can be used for repeatedly within the 1-hour alarm active interval.
Timer Function
1. Push the power knob till the standby indicator (red color) light off. Unit is turning from standby mode to operation mode.
2. When the unit is turned on, press sleep button repeatedly to choose the sleep time minutes from 90>80>70.....>10 Off.
3. Sleep time setting is stored when the "sleep" icon lights up on the display.
4. When the sleep time minutes is over, unit will be switched to standby mode automatically
Radio Tuning
1. Press tuner button to activate "tune" mode.
2. Select the desired band by radio tuner button (am or fm) again.
3. Tune to the required station by turning tuning knob upwards or backwards for 1-2 seconds, and then release.
4. The unit will start seeking automatically and stop when a radio station is found.
Manual Preset Radio Stations
1. When the desired radio station is found, press mode button, program number will be flashing.
2. Press preset up or preset down to choose the program number for storing the desired radio station.
3. Press mode button again to confirm, program number will stop to flash.
4. Repeat step 2 & 3 until all desired radio stations is being found and stored
5. Press preset up or preset down to choose the preset radio stations.
6. The number of stations can be found and stored is depended on the reception of different area and countries.
Auto Preset Radio Stations
1. During radio mode, press the scan button, the unit will automaticlly scan the radio frequency. When the clear signal is found, it will automatically
store the radio station, starting from program number 1.
2. The number of stations can be found and stored is depended on the reception of different area and countries.
Fm & Fm-Stereo Reception
- Press "fm st." Button on the remote control to seltect fm mono or fm stereo mode. When stereo signal are weak. It is preferable to receive the
program in mono.
- "St" icon light up on the display to show fm stereo mode is receiving.
Hints for better reception
1.Am: there is a built-in am bar antenna. If am rececption is weak, slightly rotating or re-positioning of the unit will usually improve the am reception.
2.Fm : the receiver has a built-in fm wire antenna hanging at the rear cabinet. This wire should be totally unraveled and extended for best reception.
Fm & Fm-Stereo Radio Encoding
1. Press tuner button to activate "tune" mode and select the desired band by radio band button (am or fm).
2. Insert memory device (usb drive, sd or mmc card)
12
TT 1068 E