Declaration Of Incorporation - elero Veco Instrucciones De Montaje

Declaration of incorporation

5 Declaration of incorporation
DECLARATION OF INCORPORATION
Declaration of incorporation for installation partly completed machinery in accordance with
the Machinery Directive 2006/42/EC
We hereby declare that the following mentioned product/s meet/s the standards of the
European Community.
Product designation:
Description:
The conformity of the above mentioned products with the relevant health and safety requi-
rements is taken into account by the following directives and standards:
We also declare that specific technical documentation in accordance with Annex II B
regarding partly completed machinery has been created and is stored appropriately. The
partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
directive, where appropriate.
Beuren, 21.06.2011
Ulrich Seeker, Naßäckerstr. 11, D-07381 Pößneck
-CE-Manager-, -Representative-
20
Linear actuator Veco
Electromechanical push rod drives for implementing a linear move-
ment
• EMC-Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC
DIN EN 60529 (VDE 0470-1):2000
• RoHS-Directive 2002/95/EC