Uline H-9447 Guia De Inicio Rapido página 4

6. Insert bolts and refasten using nuts and 1/2"
wrenches. Do not overtighten. Repeat on opposite
center leg. (See Figure 16)
Figure 16
1. Lubricate latches on a regular basis.
2. Check fasteners on a regular basis for security. Pivot
point fasteners should allow ease of rotation. Do not
overtighten.
LAMINATE SURFACE
1. Wipe with a damp cloth or sponge and a mild soap
or detergent. Rinse thoroughly with warm water and
wipe dry.
2. Difficult stains such as coffee or tea can be
removed using a mild household cleaner/detergent
and a soft bristled brush, repeating as necessary.
NOTE: Test the cleaner/detergent on a small,
non-conspicuous area first to ensure there is no
discoloration to the laminate.
PAGE 4 OF 12
OPERATION CONTINUED
MAINTENANCE
3. Lubricate all pivot points semi-annually.
CLEANING
UNDERNEATH TABLE
1. Table can be placed in a partially folded position to
2. Table can also be closed completely and moved
1-800-295-5510
uline.com
clean underneath without having to move the table
completely.
away to clean the area underneath.
0521 IH-9447