Installing Latch - ZKTeco ML200 Serie Guia De Instalacion

Door thickness
NOTE
1)
* If you don't want to drill an extra hole on your door, you can just skip this
step.
2)
If you wish to have added stability, drill for the hole by referring to the
provided Installation Template.

Installing Latch

3
Adjust the backset of the lock. (if needed)
1)
2) Fix the Latch with the Screw A. Make sure the Latch angle faces the door jamb.
30~60mm
*
Center line of the handle
Desired handle height
Screw A
4