Installing Outdoor Assembly - ZKTeco ML200 Serie Guia De Instalacion

Installing Outdoor Assembly

4
There are two methods to install the Outdoor Assembly.
Method 1: Installing with Double Sided Tapes
v
Paste a Double Sided Tape on the Mounting Plate of the Outdoor Assembly.
1)
Insert the Spindle into the clutch. Make sure the triangle mark points to the
2)
vertically centred position.
3)
Attach the Outdoor
holes.
Clutch correct position:
The triangle must be vertically centered.
Method 2: Installing with Stud
v
Fix the Stud on the Mounting Plate of the Outdoor Assembly.
1)
2)
Insert the Spindle into the clutch. Make sure the triangle mark points to the
vertically centred position.
3)
Attach the Outdoor
holes.
Clutch correct position:
The triangle must be vertically centered.
Assembly to the door by inserting the cable through the drilled
Assembly to the door by inserting the cable through the drilled
5
*