Installing Mounting Plate And Gasket; Installing Indoor Assembly - ZKTeco ML200 Serie Guia De Instalacion

Installing Mounting Plate and Gasket

5
1)
Attach the Mounting Plate to the Gasket and route the cable through the hole.
2)
Place the Gasket and Mounting Plate on to the door and use Screw B to fix them.

Installing Indoor Assembly

6
Select the Indoor Assembly Installation method according to the previously selected
Outdoor Assembly Installation method in Step 4.
Method 1: Installing with Double Sided Tapes
v
Connect the cables to the port on the Indoor
1)
2)
Place the Indoor
Screw E to fix the Indoor
Note: Fix the Screw E into the wooden door with the Screwdriver.
Assembly properly on the Mounting Plate. Then use Screw D &
Assembly .
Assembly .
6
Screw B
Screw E
Screw D