BRONZONI IM 1001 Manual De Uso página 19

19
1 – INTRODUCTION
This booklet provides instructions for the use of our THREE and SINGLE-
PHASE motors.
These instructions cannot offer detailed information on all possible
structural options, nor can they extensively cover every single aspect of
motor installation, operation and maintenance. The sole objective of
this booklet is to give qualified personnel the necessary instruction for
the proper use of machinery and equipment for industrial purposes.
The design, construction, performance, reliability, mechanical dimensioning
and materials make these motor expressly suitable for industrial applications.
The use of motors complies with national laws and regulations.
Prior to motor installation and operation, read the instructions carefully.
The manufacturer declines all responsibility in the case of accident or
damage resulting from negligence and/or failure to comply with the
instructions or from operation in conditions that differ from those listed
on the rating plate (see fig. 8); nor can it be held responsible for any
damage caused by improper use of the motors.
BRONZONI has the right to modify and improve the structural characteristics
of its products and amend the contents of this booklet without prior notice. All
rights are reserved.
For any additional copy of this booklet and/or extra information on its
contents, do not hesitate to contact BRONZONI.
2 – MANUFACTURER
Bronzoni
s.r.l.
MOTORI ELETTRICI
Via G. Baisi n° 20/A
42030 Ramiseto (RE)
ITALY
Tel: 0039 0522 817147 – 817500
Fax: 0039 0522 817521