Recommendations For Use; Description Of The Product; Recommendations For Installation - Nice Moon MOMB Instrucciones Y Advertencias Para La Instalación Y El Uso

ENGLISH
1 RECOMMENDATIONS AND GENERAL
PRECAUTIONS
1.1 - Recommendations regarding safety
• ATTENTION! – This manual contains important instructions and recom-
mendations regarding the safety of persons. Incorrect installation can
cause serious injury. Read the manual completely before starting work. If in
doubt, suspend the installation and request clarifications from the Nice After-
sales Assistance.
• ATTENTION! – Important instructions: keep this manual for any future
maintenance interventions and product disposal.

1.2 - Recommendations for installation

• Before installation, check that this product is suitable for the use desired (see
"Limits of use" and "Product technical features"). If it is not suitable, DO NOT
proceed with installation.
• Handle the product with care during installation, preventing crushing, blows,
falls or contact with liquids of any nature. Do not place the product near to
heat sources or expose it to naked flames. All of these actions can damage it
and be cause of malfunctioning or dangerous situations. If this occurs, sus-
pend installation immediately and contact the Nice After-sales Assistance.
• Do not modify any product parts. Unauthorised operations can only cause
malfunctioning. The manufacturer declines liability for damage deriving from
arbitrary modifications to the product.
• The product is not destined to be used by persons (including children) with
reduced physical, sensorial or mental capacities or with no or little experience
and knowledge, unless they have been able to benefit by surveillance or train-
ing regarding use of the product by means of a person responsible for their
safety.
• The product cannot be considered an efficient protection system against
intrusion. For efficient protection the automation must be integrated with oth-
er safety devices.
• The product packaging material must be disposed of in compliance with local
legislation.

1.3 - Recommendations for use

• Use a soft, damp cloth the clean the surface of the product. Use water only:
do not use detersives or solvents.
2

DESCRIPTION OF THE PRODUCT

AND DESTINATION OF USE
The MOMB transponder reader is a device that permits to check and allow the
access to places or services, exclusively to authorised staff. ATTENTION! –
Any use different to that described and in environmental conditions differ-
ent to those stated in this manual must be considered improper and pro-
hibited!
With MOMB, it is possible to command an automation by placing a transpon-
der card near to the reader. The card must be memorised in the reader memo-
ry. It has a removable memory; this can be programmed (see chapter 4) also
with the aid of the Nice O-Box and MOU programming units.
The MOMB communicates with the devices present in the automation by
means of the "Bluebus" system. This allows to make the electric connections
with the aid of only 2 wires, on which both the electrical input and the commu-
nication signals transit. The electric connection is the parallel type and polarities
do not have to be respected. Every device connected to the control unit is
recognised individually during the learning phase thanks to the addressing of
the electric jumper present in the MOMB. Moreover, during the learning phase
the command devices are associated to the control unit by an unmistakable
code, which guarantees maximum safety in order to prevent fraudulent
attempts to replace the device.
English – 1