DeFelsko PosiTest AT-A Manual De Instrucciones página 12

Units
Converts the display from psi, MPa, N/mm
force). Existing measurements in memory are not converted.
Switching units closes Memory.
Gage Info
Displays the model number and serial number, PosiSoft.net
registration key, the amount of remaining memory for storage of
readings, date and time, and software packages.
For security purposes, the registration key is required to add the
Gage to your PosiSoft.net account (pg. 12).
Reset
Restores factory settings and returns the instrument to a known
condition. The following occurs:
- All batches, stored readings, notes, batch names, and screen
captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Pull Parameters = default
Orientation = Landscape
NOTE:
Date, Time, and WiFi are not affected by a Reset.
In the unlikely event that the instrument becomes unresponsive
or will not power down, press and hold
screen fades to white, then release. The gage will restart.
Set Clock
All measurements are date and time stamped (24 hour format)
when stored into memory. It is therefore important to keep both
the date and time current using this menu option. Use the
and buttons to scroll, and the
each value. The instrument's date and time can also be viewed
in Gage Info and on top of the main menu.
Bluetooth = ON
WiFi = OFF
USB Drive = ON
and
11
, or Newtons (unit of
2
Units = psi
Backlight = Sun
Language = English
and until the
buttons to adjust