Technical Data; Symbols And Their Meaning; Intended Use; General Safety Instructions - wolfcraft 6901000 Manual De Instrucciones

INTRODUCTION
• PLEASE NOTE: Do read all safety and other instructions that have come with the parallel milling guide and with
the power tools you use for work. Failing to observe the safety and other instructions may cause electric shocks,
fire and/or severe injuries.
• Do keep the operating instructions for future reference in a safe place.

TECHNICAL DATA

Dimensions:
Maximum cutter diameter:
Weight:

SYMBOLS AND THEIR MEANING

Warning against a general danger
Read the instructions!
Goggles must be worn.
Hearing protection must be worn.

INTENDED USE

Milling guide 6901 is to be used
• exclusively for being fixed to the wolfcraft machine table (Article No. 6900) in its function as stationary router table.
• as parallel guide for milling jobs with the protective hood as well as the dust extractor installed and activated.
• for work pieces with a maximum thickness of 40 mm that can be easily cut.
The user is liable for any damage and accidents caused by using the equipment not for the intended purpose.

GENERAL SAFETY INSTRUCTIONS

• Keep your workplace clean and well lit. Poor housekeeping or unlit working areas may result in accidents.
• Do not work with power tools in an explosive ambience, where flammable liquids are kept and where gas or dust occur.
Power tools will generate sparks which might ignite the dust or vapours.
• Keep children and other persons off your workplace, while using power tools. When getting distracted you can lose the
control over the equipment.
• The plug of the power tool must fit into the socket. The plug must not be tampered with. Do not use adapters together
with grounded power tools. Unmodified plugs and matching sockets will reduce the risk of getting an electric shock.
• Keep power tools out of the rain and away from wetness. Water penetrating into a power tool will heighten the risk of
getting an electric shock.
• When working with a power tool outside, use only extension cords that are suitable for outdoor use. Using an extension
cord that is suitable for outdoor use will reduce the risk of getting an electric shock.
• If it is unavoidable to use a power tool in a wet ambience, use a residual-current circuit-breaker. It will reduce the risk of
getting an electric shock.
• Take care of what you do and handle the power tool with care. Never use a power tool, when you feel tired or when
you are under the influence of drugs of any kind or alcohol. One moment of inat-tentiveness while using the power tool
can cause severe injuries.
• Do wear suitable personal protective clothing and equipment, such as hearing protection, goggles, dust masks while
doing dust-generating jobs as well as protective gloves, when processing rough materials and when changing tools.
610 x 127 x 242 mm (width x depth x height)
27 mm
1,9 kg
t
Dust mask must be worn.
Pull the plug.
To be milled in counter rotation only.
11