Sanus XF228 Manual De Instrucciones página 11

4-3
Secure the arm
[21]
5
Adjustments
5-1
Remove wall plate inserts
5-2
Adjust arm position -
6901-002115 <05>
FOR WOOD STUD APPLICATIONS ONLY.
[29]
[22]
TILT TV UPWARD. Install and tighten locking screw [21].
[21]
CAUTION:
Avoid potential injuries or property damage!
Do NOT adjust the arm position from center for concrete
applications. Arm MUST remain centered for all concrete
applications!
For wood stud applications, loosen, do not remove, screw [22].
Slide the arm in the desired direction, then re-tighten screw [22].
11