Manuales relacionados para Sanus VMT5
Resumen de contenidos para Sanus VMT5
- Página 1 THANK YOU FOR CHOOSING SANUS THE #1 TV MOUNT BRAND IN THE US. VMT 5 Instruction Manual Scan for easy install video...
- Página 2 TWO SIMPLE STEPS TO FINDING YOUR STUDS: Holding it vertically, lightly move the SANUS Pull apart the SANUS Magnetic Stud Finder to Step 1 Step 2 Magnetic Stud Finder up and down while expose the probing pin within.
-
Página 3: Lo Haremos Sin Estrés
VMT5 We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Lo haremos sin estrés Para Español Si tiene preguntas mientras realiza la instalación, llámenos. ver página 36... - Página 4 Before getting started, let’s make sure this mount is perfect for you! Does your TV weigh No — Perfect! more than 75 lb 75 lb Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call (34 kg) including (34 kg) 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. accessories?
- Página 5 STEP 1 Attach Bracket to TV Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 6 1-1 Select TV Screws 1-2 Spacers Hand thread screws into the threaded inserts on the back of your TV Spacers and screws are supplied to install your TV bracket. to determine which screw diameter (M4, M5, M6, or M8) to use. Determine your preference for spacer configuration when attaching your TV bracket.
- Página 7 1-3 Attach TV Brackets Center the TV brackets over your TV hole pattern as shown - making sure the brackets are level. Standard configurations are shown. For special applications, or if you NOTE: The tilt tension knob TV brackets should be oriented to the outside edges. are uncertain about your hardware selection, contact Customer Service Install using the spacer, screw and washer combination you selected for your TV.
- Página 8 STEP 2 Attach Wall Plate to Wall For wood stud (Double Stud) installations, follow STEP 2A on PAGE 10 For wood stud (Single Stud) installations, follow STEP 2B on PAGE 15 For concrete installations, follow STEP 2C on PAGE 22...
- Página 9 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product. NOTE: Not all hardware included will be used. * Sanus Magnetic Stud Finder Wall Plate...
- Página 10 Stud centers must be verified – not all walls have conventional 16 in. (406 mm) or 24 in. (610 mm) stud spacing Locate a nail/screw in the studs using the Sanus magnetic stud finder provided. Find the edges of the studs using the...
- Página 11 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
- Página 12 Partially install the top two lag bolts , leaving about 1/2 in. (13 mm) space from the wall. NOTE: This space allows you to remove the wall plate template and hang the wall plate onto the top lag bolts Remove the wall plate template ≈...
- Página 13 Slide the covers open on the wall plate to expose the mounting holes. Hang the wall plate on the top lag bolts...
- Página 14 10. Install the bottom two lag bolts . Firmly tighten all four lag bolts until they are pulled flush against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place. CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted...
- Página 15 The middle two lag bolts MUST be installed into a wood stud – this product was not designed to be used in drywall alone Locate a nail/screw in the stud using the Sanus magnetic stud finder provided. Find the edges of the stud using the probe of the stud finder...
- Página 16 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
- Página 17 Drill the outer top two pilot holes (into the drywall) using a 1/2 in. (13 mm) diameter drill bit. IMPORTANT : Pilot holes must be drilled to a depth of 1 in. (25 mm). Remove the wall plate template 1 in. (25 mm) 1/2 in.
- Página 18 Insert two anchors into the outer top holes (into the drywall). Pull to rotate the anchor inside the drywall. Single Stud Installation Kit VMTMK1 is not included Contact Customer Service at 1-800-359-5520 to have the additional hardware shipped directly to you.
- Página 19 10. Hold the end of the anchor , while sliding the cap against the drywall. 11. Snap off the ends of the anchor to lock in place. CAUTION: Be sure the cap is seated against the drywall surface and the ends of the anchor do not extend beyond the cap cut if neccessary.
- Página 20 12. Slide the covers open on the wall plate to expose the mounting holes. 13. Install the middle two lag bolts (into the stud), and firmly tighten until they are pulled flush against the wall plate CAUTION: Avoid potential personal injury or property damage! Both lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate CAUTION:...
- Página 21 14. Install the top outer two bolts and washers (into the drywall anchors ) and firmly tighten until the bolts are pulled flush against the wall plate CAUTION: Avoid potential personal injury or property damage! Both bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate .
- Página 22 Level the wall plate template and mark the hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.
- Página 23 Remove the wall plate template and insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Partially install the top two lag bolts , leaving about 1/2 in. (13 mm) space from the wall. NOTE: This space allows you to hang the wall plate onto the top lag bolts ≈...
- Página 24 Slide the covers open on the wall plate to expose the mounting holes. Hang the wall plate on the top lag bolts...
- Página 25 Install the bottom two lag bolts . Firmly tighten all four lag bolts until they are pulled flush against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place. CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted...
- Página 26 STEP 3 Attach TV to Wall Plate HEAVY ! You may need assistance with this step. Hook the TV/brackets onto the wall plate NOTE: The TV/brackets can be slid anywhere along the wall plate for optimal positioning of your TV. Rest the TV into place against the wall.
- Página 27 Manage Cables Tilt the TV up or down to gain access to the back of the TV. Attach your cables, then adjust the TV as desired. Cables...
- Página 28 Adjustments LEVEL Tilt To level your TV, turn the level Your TV should adjust easily when moved, then stay in place. adjustment screw on the top of either TV bracket Adjust the tilt tension knob if your TV to raise or lower that naturally tilts up or down.
- Página 29 TV LATERAL SHIFT REMOVING THE TV HEAVY ! You may need assistance with this step. HEAVY ! You may need assistance Disconnect all cables from the TV. with this step. To unlock the TV from the wall plate: Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall.
- Página 30 Flat Back / Low Profile and your installation requires Use your TV supplied spacers and TV Supplied TV Supplied do not use the Sanus spacers Spacer Spacer NOTE: If using the M8x35 mm screws , you may or may not...
- Página 31 For TVs that come with inset spacers or wall mount adapter rings, Rounded Back / Extra Space and your installation requires Use the Sanus spacers TV Supplied Spacers and longer screws. Do not use your TV supplied spacers. NOTE: If using the M8x45 mm...
- Página 32 Features TV tilts up or down for the Brackets adjust side to TV bracket expands perfect viewing angle side within the wall plate to fi t TV hole patterns for optimal positioning from 200 x 200 mm up to 400 x 400 mm Locking mechanisms Adjustment knobs allow Level adjustments create...
- Página 33 Dimensions 23.25 590.6 16.00 [mm] 406.4 7.25 5.08 184.2 128.9 0.35 0.72 18.3 2.15 15.75 54.7 400.0 7.00° 7.87 200.0 7.87 17.70 200.0 449.6 15.75 400.0 NOTE: The offset hole pattern on right TV bracket is designed to 12.00° accommodate a better range of TV hole patterns, while allowing proper engagment with the wall plate.
- Página 34 Para Español ver página 36...
-
Página 36: Listo Para Comenzar
¿Su televisor pesa más de 34 kg No — ¡Perfecto! (75 lb), incluidos 34 kg Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al los accesorios? (75 lb) 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿Tabiques ¿Hormigón... -
Página 37: Seleccionar Los Tornillos Del Televisor
ESPAÑOL PASO 1 Colocar las placas de sujeción en el televisor Ver página 5 Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;... -
Página 38: Opción Para Montantes De Madera (Instalación De Doble Montante)
ESPAÑOL PASO 2 Fijar la placa mural a la pared Ver página 8 Para instalaciones sobre montantes de madera (doble montante), siga el PASO 2A en la PÁGINA 10 Para instalaciones sobre montantes de madera (un solo montante), siga el PASO 2B en la PÁGINA 15 Para instalaciones en paredes de hormigón, siga el PASO 2C en la PÁGINA 22 Piezas y elementos de sujeción para el PASO 2 ADVERTENCIA:... -
Página 39: Opción Para Montantes De Madera (Instalación De Un Solo Montante)
Nivele la plantilla de la placa mural y fíjela con cinta adhesiva en el lugar. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. IMPORTANTE : Asegúrese de marcar y perforar el centro del montante. - Página 40 Nivele la plantilla de la placa mural y fíjela con cinta adhesiva en el lugar. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. IMPORTANTE : Asegúrese de marcar y perforar el centro del montante.
-
Página 41: Opción Para Hormigón Sólido O Bloques De Cemento
Nivele la plantilla de la placa mural y marque la ubicación de los orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cuatro orificios guía con una mecha de 10 mm (3/8") de diámetro. -
Página 42: Paso 3 Fijar El Televisor A La Placa Mural
ESPAÑOL PASO 3 Fijar el televisor a la placa mural Ver página 26 ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. Cuelgue el módulo televisor-placas en la placa mural NOTA: El módulo televisor-placas se pueden deslizar hacia cualquier parte junto con la placa mural para lograr un posicionamiento óptimo de su televisor. -
Página 43: Inclinación
ESPAÑOL Inclinación El televisor debe acomodarse fácilmente al moverlo y luego quedar en su lugar. Si su televisor se inclina naturalmente hacia arriba o hacia abajo, ajuste la perilla de tensión de inclinación NOTA: Si no tiene la intención de ajustar la inclinación para los diferentes puntos de visualización, puede ajustar la perilla de tensión de inclinación para evitar movimientos indeseados. - Página 44 / perfil bajo soportes murales, su instalación requiere Use los separadores proporcionados con el televisor y no use los separadores Sanus NOTA: Si está usando tornillos M8 de 35 mm , es posible que necesite (o no) las arandelas , según la longitud de sujeción del tornillo.
-
Página 45: Descripción
ESPAÑOL Descripción Ver página 32 La placa de sujeción se expande para adecuarse a televisores con patrones de orificios de 200 x 200 mm hasta 400 x 400 mm. Las placas de sujeción pueden ajustarse de un lado al otro de la placa mural para lograr un posicionamiento óptimo. Los mecanismos de bloqueo brindan una mayor seguridad. - Página 46 Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.
- Página 47 Learn ways to get the most out of your space. FACEBOOK.COM/SANUSSYSTEMS Find product updates and more. Learn installation tips, tricks and household know-hows. TWITTER.COM/SANUSSYSTEMS View step-by-step product videos to ease your install experiences. YOUTUBE.COM/SANUSSYSTEMS Find the latest news stories about your favorite SANUS products.
- Página 48 If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! ‘Monthly prize’...