Troubleshooting - cecotec BIGDRY 5000 ADVANCE Manual De Instrucciones

ENGLISH

6. TROUBLESHOOTING

Problem
The unit does not work
The dehumidifying
function does not work
32
BIGDRY 5000 ADVANCE
Possible cause
Has the power cord been
disconnected?
Is the tank full indicator on?
(The tank is full or not installed
properly)
Is the temperature of the room
above 35 or below 5 ?
Is the filter clogged?
Is the intake duct or discharge
duct obstructed?
Solution
Plug the power cord into the
outlet.
Empty the water in the tank
and then reinstall the tank.
The protection device is
activated and the unit
cannot operate.
Clean the filter as described
in this manual.
Remove the obstruction
from the discharge duct or
intake duct.