Safety Instructions - cecotec BigDry 2500 Pure LighT Manual De Instrucciones

ENGLISH

1. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
• Make sure that the mains voltage matches the voltage sta-
ted on the rating label of the appliance and that the wall
outlet is grounded.
• Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the official Techni-
cal Support Service of Cecotec, in order to avoid any type of
danger.
• To avoid electric shocks, do not clean with or allow to get in-
side the product: water, liquid or any flammable substance.
• Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
• Appliance shall be installed, operated and stored in a room
with a floor area larger than 4 m2.
• Switch off the device immediately in the event of defects or
malfunctions.
• Do not use the device if its cord or any other part is dama-
ged. In this case, contact the official Technical Support Ser-
vice of Cecotec.
• Do not spray insecticide, perfume or other flammable subs-
tances around the product. Do not operate the device with
products with odours.
• Do not install the device near to heat-generating appliances
or flammable and dangerous materials.
• This product does not replace normal ventilation products.
• Make sure the product is used and kept in well-ventilated
areas.
• During operation, leave at least a 30-cm space on the back
and sides of the product.
6 BIGDRY 2500 PURE LIGHT - BLACK
05604_BigDry 2500 Pure Light_manual_LB.indd 6 12/9/19 9:46