Replacing The Grit Filter; Replacing The Solenoid Valve Cartridge - Franke 2000105117 Instrucciones De Montaje Y Uso

15. Replacing the Grit Filter

Filter for corner valve
15.1 Close the corner valve (c).
15.2 Trigger the valve.
15.3 Unscrew the connector hose (a) from the corner valve.
15.4 Replace the grit filter (b).
15.5 Reassemble in the reverse order.
Filter, solenoid valve cartridge
15.6 Remove the solenoid valve cartridge (see
15.7 Use a flat nose pliers to pull the filter (d) out.
15.8 Replace the filter.
☞
Important!
Ensure correct installation position. The rib of the filter must not lie on the flow-
through hole.
15.9 Reassemble in the reverse order.

16. Replacing the Solenoid Valve Cartridge

16.1 Close the corner valve.
16.2 Trigger the valve.
16.3 Loosen the screw (a) with an Allan key.
16.4 Pull the housing (b) from the base (c).
16.5 Remove the screws (d).
16.6 Remove the mounting bracket (e).
16.7 Remove and replace the solenoid valve cartridge (f).
16.8 Reassemble in the reverse order.
8
info@hygiene-shop.eu - www.hygiene-shop.eu
Chapter 16.).