Kohler PINOIR K-2015 Instrucciones De Instalación página 3

S
Drill a 1/4" (6mm) mounting hole at
the mark on the floor, then drill two
1/4" (6mm) hanger bolt holes at the
marks on the wall.
S
Mount hanger bolts to the wall so
approximately 1-1/4" (3.2cm) of
each bolt remains exposed.
NOTE: Other fastening devices of
sufficient size and strength may also be
used.
S
Install the faucet and drain to the
lavatory according to the
manufacturer's instructions.
NOTE: Do not fully tighten slip-joint
drain connections at this time.
S
Position the pedestal mounting
hole over the hole in the floor.
S
Secure the pedestal to the floor
with the wood screw and washer.
Tighten the wood screw until it is
snug.
CAUTION: Risk of
.
damage Do not
Overtightening may cause damage
to the product.
Kohler Co., Kohler, WI U.S.A.
Hanger
Bolts
product
overtighten.
3
Finish Wall
Pedestal
Wood Screw
Washer
A
1010427-2-