Whittier Wood Products Chaparral 597KFDW Instrucciones Para Armar

Buró crescent

Publicidad

Enlaces rápidos

Model #
597KFDW
Crescent Nightstand
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload drawers on this unit.
For maximum stability, attach unit to the wall
using the enclosed hardware as per instructions.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°.
(Not on a cold, possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any
Rev. 6/05

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Products Chaparral 597KFDW

  • Página 1 Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 597KFDW Crescent Nightstand — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. 1 — Top — Qty. 1 2 — Back — Qty. 2 3 — Left Side — Qty. 1 5 —...
  • Página 3: Tools Required

    ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue, Tape Measure STEP 1 x 18 1. Glue three Dowels (A) in the tops of the Left and Right Sides (3 & 4) and two in both ends of Front and Rear Sleepers (9 & 11). 597KFDW –...
  • Página 4 STEP 2 x 03 Glue dowels in sleepers into the holes in the Left Side (3). The pocket drilled holes in the rear sleeper must be on the outside of the unit. Insert a 4 x 40mm Phillips Pan Head Screw (C) in the pocket drilled holes in the bottom of the front sleepers and in back of the rear sleeper.
  • Página 5 STEP 4 Insert the dowels in the top edge of the Sides into the holes in the Top (1). Fasten in place with 4 x 35mm Phillips Pan Head Screws (F) through the holes in the side cleats. STEP 5 Place the Backs (2) on back of the unit with the Back Channel (12) between them.
  • Página 6 STEP 6 Attach Drawer Sides (5 & 7), with slide wheels to the rear and grooves for drawer bottom aligned, to the Drawer Front (8) with 3.5 x 30mm Phillips Screws (D). Slide the Drawer Bottom (6) into grooves in drawer side and attach the Drawer End (10) with Screws (D). Attach a Knob (G) to each drawer with a 4 x 50mm Phillips Screw (B).
  • Página 7 TIPPING RESTRAINT Your unit comes with a tipping restraint to help prevent the unit from falling forward should a child attempt to climb on it. Please follow the instructions provided below. TIPPING RESTRAINT Attach tipping restraint to the center of the top back edge of your unit. Follow these instructions and use the hardware contained in the packet provided.
  • Página 8: Instrucciones Para Armar

    Apriete los tornillos o repare las piezas según instrucciones. corresponda. Código del producto P.O. Box 2827 Eugene, OR 97402 USA Rev. 6/05 Presentada por Whittier Wood Products...
  • Página 9 597KFDW Buró Crescent LISTA DE PIEZAS Antes de comenzar a armar, veri fique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Cant. Cant. Cant. 10 Panel posterior del cajón ..03 Panel superior ......
  • Página 10 Ne pas surcharger les tiroirs de cet article d’ameublement. Pour une stabilité maximum, fixez l’unité au mur a l’aide du petit outillage fourni, en suivant les instructions. Code produit P.O. Box 2827 Eugene, OR 97402 USA Rév. 6/05 Présenté par Whittier Wood Products...
  • Página 11: 597Kfdw Table De Nuit Crescent

    597KFDW Table de Nuit Crescent NOMENCLATURE DES PIÈCES AVANT DE COMMENCER L’ASSEMBLAGE, véri fiez si la quantité des pièces reçues correspond à la liste ci-dessous. Qté Qté Qté C Vis cruciforme à tête 10 Extrémité de tiroir ....03 Dessus ........01 bombée (4,0 x 40 mm) ..

Tabla de contenido