Toshiba CAMILEO Z100 Guía De Usuario página 66

66
Troubleshooting
Problem / Situation
When the camcorder is
connected to the PC
via USB cable, many
Autoplay windows may
pop out. They indicate
the disks of the
camcorder.
1 The files on the memory card do not display properly when
the LCD touch screen shows the "!" marking.
The "!" symbol indicates that the SD
speed or contains corrupted files. To solve this problem, format
the SD
(Refer to
Change the SD/SDHC/SDXC card to a high speed card.
2 Why do some of my indoor photos look blurry and dark?
The camcorder extends picture exposure time under low-light/
indoor conditions. Keep the camcorder (and the target subject)
steady for several seconds when taking photos. The shutter
sounds when a picture is taken.
3 How do I charge the battery?
You must use the supplied AC adaptor or the USB cable.
The camcorder must be turned OFF. A blinking light confirms
the camcorder is currently charging. A steady light indicates
that charging has been completed. The light turns off
automatically after battery is fully charged (In AC charging
Mode).
Recommendation / Solution
[DV] indicates the internal memory of the camcorder.
[Removable Disk] indicates the external memory
(memory card installed in the camcorder).
The disk [DVAP] shows the built-in CAMILEO
UPLOADER application is saved at this disk. Please DO
NOT format this disk or delete the application inside;
otherwise, the CAMILEO UPLOADER application can
not function.
™
Card using the camcorder instead of a computer
"Format" on page
™
Card is too low of a
50).