Battery Type; Package Contents; Intended Use - DeWalt DCS573 Traducido De Las Instrucciones Originales

EnGLIsH
r
Do not charge damaged battery packs.
s
Do not expose to water.
t
Have defective cords replaced immediately
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
B
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The following tools operate on a 18 volt battery pack: DCS573
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.

Package Contents

The package contains:
1 Circular saw
1 Circular saw blade
1 Blade wrench
1 Parallel fence
1 Dust extraction port
1 Charger (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
44
WALT batteries with a D WALT
e
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. F)
The date code , which also includes the year of manufacture,
16
is printed into the housing.
Example:
Year and week of Manufacture
Description (Fig. A, E)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch lock‑off button
1
Trigger switch
2
Battery pack
3
Depth adjustment lever (Fig. E)
4
Shoe
5
Lower blade guard retracting lever
6
Lower blade guard
7
Blade clamping screw
8
Kerf indicator
9
Bevel adjustment lever
10
Blade lock button
11
Auxiliary handle
12
Battery release button
13
Rafter hook
14
Worklight
15

Intended Use

This heavy‑duty circular saw is designed for professional
wood cutting applications. Do not cut metal, plastic, concrete,
masonry or fiber cement materials.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This heavy‑duty saw is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
2021 XX XX