Designing Decorative Stitches - Texi ART AUTO Manual De Usuario

8.5 Designing decorative stitches

In the machine can be saved total 9 types of patterns. In new machine 4 types are already designed and saved.
Entering decorative stitch mode
Press stitch length key and by using „+" / "-" keys choose value 5 (7 for ma-
chine H), then press „+" one more time to enter decorative stitches mode (D1-
D9). First from the special stitch will be D1. Choose needed pattern, press "S"
key to confirm and start to sew.
Note: when you want to use Design patterns function, pls remember to close
the front and back bartacking function.
Designing and editing special decorative stitches
Press for few seconds middle button shown on the picture 1 as (5)
Create or edit pattern by using "+" / "-" icon to change stitch length and arrows
to go to the next step.
Example: designing pattern from picture (4).
Please follow below steps (in correct order 1,2,3...8)
by using buttons:
The above pattern is designed to sew forward and backward.
Selecting the stitch length with a negative value (-4.0), select the stitch length
that will be sewed backwards. Plus value means sewing forward. Quantity of
stitches can be changed, increased depending on your needs.
Pattern types can be saved (max 9 patterns) and edited.
STEP STITCH LENGTH
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
39
QUANTITY OF STITCHES
4.0 01
-4.0 01
4.0 01
-4.0 01
4.0 01
-4.0 01
4.0 01
2.0 01
EN TEXI ART AUTO operation manual