Electrical Safety; After Use - METRO PROFESSIONAL GSC3336 Manual De Instrucciones

Ocultar thumbs Ver también para GSC3336:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87
disposal procedures. When
disposing of them, please
consult your service agent or
a similarly qualified person.
GB
41. Do not place heavy objects or
objects filled with water, e.g.
vases, on the appliance.
42. Keep a minimum distance of
1m between the appliance
and walls or other objects.
If the distance is too small,
the cooling capacity may be
impacted.
43. Do not use excessive force
to open the glass door and
do not apply pressure to
the glass to prevent it from
breaking.
44. After turning the appliance off,
always wait at least 5 minutes
until turning it on again.
Otherwise, the compressor
may be damaged.
45. The appliance is very heavy.
It is recommended to slide
the appliance for transport
whenever possible. If the
appliance must be lifted,
please only do so with
specialized equipment or
have it lifted by qualified
professionals.
46. Important! Allow the
appliance to stand upright
for at least 8 hours before
connecting it to a mains outlet
for the first time, so that the
refrigerant can settle.
47. Please double check and
confirm there is no person
inside the appliance before
locking the door.

Electrical safety

1. Ensure the rated voltage
shown on the rating label
corresponds with the voltage
of the power supply.
2. Do not operate any appliance
with a damaged power
cord or plug, when the
appliance malfunctions or has
been damaged in any manner.
3. Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep
the power cord away from
hot surfaces and ensure that
nobody can trip over it.
4. Do not insert fingers or foreign
objects in any opening of the
appliance and do not obstruct
the air vents.
5. Protect the appliance against
heat. Do not place close to
heat sources such as stoves
or heating appliances.
3.

After use

Cleaning
Switch off and unplug the appliance before
cleaning or maintenance.
Do not clean the appliance with steel wool,
strong chemicals, alkali, abrasive or toxic
agents, as they may damage the surface of the
appliance and pose a health hazard.
During cleaning, do not approach sharp
elements (evaporator, condenser, etc.) that
could cause cutting injuries bare-handed.
Always use protective gloves.
Use little or no water during cleaning. Make
sure that no water enters the appliance while
cleaning it.
- 13 -

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Gsc3336-ws

Tabla de contenido