Kohler K-13717 Guia De Inicio Rapido página 3

Riser Tube
To Spout
Riser
Assembly
1. Install the Supply and Stop
Apply thread sealant to the male threads of the short pipe, long
pipe, and right-angle stop.
Assemble the short pipe, elbow, long pipe, and right-angle stop to
the foot control as shown. Tighten securely.
Install the riser tube to the spout, and tighten securely.
Carefully bend the riser tube to fit onto the right-angle stop, and
tighten securely.
Open the water supplies to the foot control. Use the volume
control key (provided) to open the right-angle stop. Run water
through the spout for one minute, moving the foot control
through its full range of operation.
Check for leaks and repair as needed.
Kohler Co.
Volume
Control Key
Right-Angle Stop
Long Pipe
Elbow
Short Pipe
Foot Control
3 105332-2-AB