Descargar Imprimir esta página

Checking The Delivery For Completeness And Damage; Initial Cleaning Of The Product; Operation - Steinbach Digitales Funk Pool Manual De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
There is a higher risk of damage to the product
if it is stored or transported without the
packaging.
-
Do not dispose of the packaging.
-
In the case of damage, substitute the packaging with an at least similar
box.

Checking the delivery for completeness and damage

1. Open the packaging carefully.
2. Take all parts out of the packaging.
3. Check the completeness of the delivery.
4. Check the delivery for damage.

Initial cleaning of the product

1. Remove the packaging material and all protective foils if present.
2. Clean all parts of the delivery as described in the "Cleaning" section.
The product has been cleaned and prepared for use.

Operation

The digital remote pool thermometer consists of 2 measuring devices:
-
Indoor unit
-
Outdoor unit
The outdoor unit is intended for measuring the temperature in the water
(e.g., pool, pond) while the indoor unit measures the inside temperature in
the house.
When you place the outdoor unit into the water, it is
recommended that you secure it with the fastening cord
The indoor unit displays both the temperature of the location where it is set
up and the water temperature transmitted wirelessly by the outdoor unit on
the display.
NOTICE!
(receiver)
1
(transmitter).
12
.
13
25

Publicidad

loading

Este manual también es adecuado para:

061333