Temperature Unit; Additional Outdoor Units - Steinbach Digitales Funk Pool Manual De Instrucciones

2. Press the CLEAR button
The saved maximum temperature values are deleted.
3. Press the MAX/MIN button
"MIN" lights up below the temperature unit (°C/°F)
4. Press the CLEAR button
The saved minimum temperature values are deleted.

Temperature unit

The digital remote pool thermometer can display the temperatures measured
by the indoor and outdoor unit in °C or °F.
Switch temperature unit
1. Repeatedly press the °C/°F button
The temperature unit (°C/°F)
temperatures are displayed in the selected unit.

Additional outdoor units

The digital remote pool thermometer has 3 channels. This means that you
can use one indoor unit with up to 3 outdoor units. To do this, each outdoor
unit must be set to a different channel.
Setting the channel
1. Open the housing of the outdoor unit
batteries").
2. Set the desired channel (CH1, CH2 or CH3) with the channel switch
(see Fig. D).
3. Close the housing of the outdoor unit
The set channel is displayed on the display of the outdoor unit.
Establishing wireless connection
During the transmitter search, place the indoor and outdoor
units at a distance of about 1.5 m (5 ft.) away from possible
sources of interference (electronic devices and wireless
units).
1. Press the CH button
The channel display
set at the selected outdoor unit. The temperature measured at the
outdoor unit is displayed on the display of the indoor unit next to the
outdoor temperature symbol
.
5
.
3
.
5
.
6
switches between "°C" and "°F" and the
2
repeatedly.
4
(indoor unit) displays the same channel that is
7
.
9
.
2
(see "Inserting or changing
12
.
12
21
29