Maximum/Minimum Function; Clearing The Memory - Steinbach Digitales Funk Pool Manual De Instrucciones

Activating the transmitter search manually
During the transmitter search, place the indoor and outdoor
units at a distance of about 1.5 m (5 ft.) away from possible
sources of interference (electronic devices and wireless
units).
1. Press the CH button
The channel display
set via the channel switch
2. Press and hold the CH button
The signal symbol
wireless signal of the outdoor unit
The temperature measured by the outdoor unit appears next to the outdoor
temperature symbol
via the set channel.

Maximum/minimum function

The maximum/minimum function displays the highest and the lowest
temperatures measured since the last time the memory was cleared.
Displaying maximum and minimum temperature
1. Press the MAX/MIN button
"MAX" lights up below the temperature unit (°C/°F)
maximum temperatures of the indoor and outdoor unit appear on the
display. After no more than 10 seconds the display switches back to the
current measurement values.
2. Press the MAX/MIN button
"MIN" lights up below the temperature unit (°C/°F)
minimum temperatures of the indoor and outdoor unit appear on the
display. After no more than 10 seconds the display switches back to the
current measurement values.
3. Press the MAX/MIN button
The currently measured temperatures of the indoor and outdoor unit are
displayed.

Clearing the memory

1. Press the MAX/MIN button
"MAX" lights up below the temperature unit (°C/°F)
28
repeatedly.
4
(indoor unit) displays the same channel that is
7
(outdoor unit).
23
4
blinks while the indoor unit
8
as soon as the indoor unit receives the wireless signal
9
.
3
.
3
.
3
.
3
for 3 seconds.
.
12
searches for the
1
. The measured
2
. The measured
2
.
2