Cancelling A Direct Call/An Alarm; Accepting Calls; Range Warning; Alignment Of The User Interface - Disty Notruf NEO Instrucciones De Operación

Cancelling a direct call/an alarm

If you accidentally trigger an alarm, simply press the
alarm button again.
EN

Accepting calls

All incoming calls can be conveniently accepted via the
distyNotruf
button. The
a green flashing LED and beeps.

Range warning

If you move to the limits of the
alert will sound (only during phone call).

Alignment of the user interface

Integrated microphone
and LED
Integrated
loudspeaker
26
signals an incoming call with
NEO
distyNotruf
range, an
NEO
Button for
emergency
call and call
acceptance
Operating instructions

Troubleshooting

When I press the alarm button to trigger an alarm call,
nothing happens.
- Check whether the LED is flashing red.
distyNotruf
Your is not connected to the base
NEO
station. Be aware that you must be within the range of
the base station/max. range: 50 m.
distyNotruf
- Check whether
If necessary, charge it using the supplied charging lead at
a power outlet.
I can trigger the alarm, but cannot make contact.
distyNotruf
- Make sure that the
tion range of the base station (up to 50 m in the house
and up to 300 m outdoors).
distyNotruf
- Check whether
- There could be a telephone network problem. If you also
cannot make a connection using your normal telephone,
then there is a telephone network error.
Operating instructions
is sufficiently charged.
NEO
is within the recep-
NEO
is sufficiently charged.
NEO
27
EN