Tips & Tricks; Switch Device Off; Personal Alarm - Disty Notruf NEO Instrucciones De Operación

Option 2:
Attachment using the belt clip
Remove the wrist strap (see paragraph
in Option 1) Remove the spring bolts
from the wrist strap and insert a spring
bolt on the side of the charging socket.
EN
Press through the centre lug of the clip
until it reaches the underside of the clip
and slide under the mounted spring
bolt. Slide the second spring bolt into
the clip. Bring the clip almost into its
end position while sliding one side of
the spring bolt into the hole provided.
Press the second side of the spring bolt
towards the clip, thus pressing the clip
into its final position.
Option 3:
Attaching using the neckband
First of all, mount the clip as described
above. Slide the lanyard strap under
the outer lug.
30 Operating instructions
Tips & tricks

Switch device off

If you do not need the device for a longer period of time
(e. g. when away on holiday), you can switch it off completely.
distyNotruf
- connect the NEO
charging lead, the red LED will then shine and an acoustic
signal will ring out to confirm it is connected
- after 5 seconds at the latest, press and hold the alarm button
- now remove the voltage-supplied charging lead and let go
off the button at the same time

Personal alarm

This feature is not available in all devices.
Although the device only has a single button, it is still possible
to ring a specific second alarm number. The required settings
for this can be found in the "ProgrammerApp" under the
tab „Configuration 2".
To dial this second number, you need to press the emergency
call button twice and quickly. The first emergency call number,
which is activated by pressing the button for at least 1 second,
is not affected by this.
Operating instructions
with the voltage-supplied
31
EN