Inspection And Maintenance Schedule - BAUKER DG5500E Manual De Instrucciones

Safety instructions for inspection and maintenance
Only regular maintenance and properly maintained equipment can ensure a
satisfactory environment. Poor maintenance may cause unpredictable accidents
and injuries.

Inspection and maintenance schedule

Timing Description
Before each operation • Check the oil level and the
engine oil.
Before each operation • Check the fuel valve and
hose for cracks or other
damage s and replace them, if
required.
Before each operation • Check the exhaust system for
leaks and seal or replace the
parts, if required.
Before each operation
and replace the parts, if
required.
Before each operation • Ch eck the start cable and
replace it, if required.
Before each operation • Check the fuel valve and
hose for cracks or other
damages and replace them, if
required.
Before each operation • Check the exhaust system for
leaks and sea l or replace the
parts, if required.
Before each operation
and replace the parts, if
required.
Before each operation • Check the start cable and
replace it, if required.
Every 6 months • Check screws and fasteners
and re place them, if required.
Every 6 months • In machines with battery
operated start, check the
battery.
Every 12 months • Check the cooling fan.
It is advised to perform maintenance in the authorized technical service at least
once a year.
77
Other details
The engine must be cold.
-
Oil change
1- Turn and pull the dipstick.
2- Remove the drain plug and pour
the crankshaft's oil tank.
3- Reinstall the drain plug.
4- Refill with oil up to the maximum level on the dipstick.
5- Reinsert the dipstick.
Temperature Range Recommended type of oil
Low 0 °C SAE10W , API CH -4 Class or equivalent
From 0 °C to 20 °C SAE20 , API CH -4 Class or equivalent
From 20 °C to 40 °C SAE30 , API CH -4 Class or equivalent
Above 40 °C SAE40 , API CH -4 Class or equivalent
DG5500SE refill quantity : 1,65 liters
Instruction manual
diesel generator
78