Tips & Troubleshooting - Gallagher S400 Instrucciones

Portable solar fence energizer
Ocultar thumbs Ver también para S400:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TIPS & TROUBLESHOOTING
Gallagher Recommends:
• Position energizer in direct sunlight and located so that no shadows will fall on the
solar panel at any time during the day.
• Face the solar panel towards the equator to achieve maximum exposure to
sunlight (i.e. directly south in the northern hemisphere or directly north in the
southern hemisphere).
• Install solar energizers on a post above the ground.
• Keep the solar panel clean (e.g. from dirt). Periodically use a soft cloth with water
and a mild detergent.
• Test voltage on the fence using a Gallagher Fence Volt Meter (G50301).
• Turn energizer off before handling fence or battery connections.
Symptom
Battery
indicator is
solid red
Battery
indicator
flashes red
Fence Voltage
indicator
flashes red
12
3E3888 Gallagher S400 Solar Energizer User Manual
Problem
Battery capacity is
low due to insufficient
sunlight. The energizer
will slow down to use
less power and allow
batteries to charge.
No batteries or an
incorrect battery is
connected or batteries
are damaged.
Output voltage is too
low, due to a high load
on the fence line.
Solutions
Ensure energizer is getting
enough sun.
Turn energizer off for 3
days leave in sun to charge
batteries.
Connect Recharge Kit
(G40110) to charge batteries.
Connect the correct batteries.
Replace both batteries.
Check batteries are OK using
the battery check function.
Check fence and earth system
for faults.

Publicidad

Tabla de contenido
loading

Tabla de contenido