Amibot Spirit Manual De Instrucciones página 20

EN
Operation
Inserting the 2-in-1 compartment
Thanks to the 2-in-1 compartment, the robot can vacuum and mop
hard floors at the same time. Clip it on the cleaning pad attachment
to the back of the robot, which automatically detects the tank. The
robot is ready to start its mopping cycle.
When the robot is turned on for its cleaning cycle, the automatic
pump in the water tank is activated to clean hard floors.
NOTE:
• You can regulate the water tank's water flow intensity via the remote control
(see page 10).
• Do not use the water tank on rugs or carpets.
• Empty the water tank and remove the cleaning pad attachment from the robot
before charging it.
Tips: When using the mopping mode, remove the central brush from its compartment to
prevent risk of oxidation. This will make cleaning the robot easier!
18