Troubleshooting; Tables: Malfunctions And Possible Causes - Amibot Spirit Manual De Instrucciones

EN

Troubleshooting

Please contact AMIBOT technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Tables: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No. Sounds
"Oh dear! I cannot
01 find the dust
collector"
"Please check if the
radar on top has
02
been covered or
blocked"
"Please place me in
03 a new location and
try again"
"Please scrub the
cliff sensor, and
04
restart me from a
new location"
Cause
The dustbin is
inserted correctly.
The laser is frozen.
Position problem.
Problem with the gap
sensors. The sensors
are dirty.
30
Solution
not Check that the dustbin is
inserted correctly.
Carefully clean the laser
and place the robot on a
flat surface.
Place the robot on a flat
surface and restart a
cleaning cycle.
Check the gap sensors and
clean them using a soft
cloth.