Nice RC2 Instrucciones Y Advertencias Para La Instalación Y El Uso página 11

To memorize the transmitters in Mode II, refer to Tables [D] and [E].
Table [D] Memorizing the first transmitter
in Mode II
1 As soon as the receiver is powered you
will hear 2 long beeps
2 Within 5 seconds, press the desired
key on the transmitter to be memorized
and hold it down until al 3 beeps have
sounded, then release the key
3 Within 3 seconds, press the same key
on the transmitter as many times as the
number corresponding to the desired
command: 1 = On-Off; 2 = Man Present;
3 = Timer1; 4 = Timer2
4 After approx. 3 seconds you will hear a
number of beeps corresponding to the
selected command
5 Within 2 seconds, press and release the
same key to confirm the programming
The 3 final beeps signal that the new transmitter has been correctly memorized.
During step 4, if you do not hear the number of beeps corresponding to the
desired function, wait 10 seconds before abandoning the procedure, then try
again.
Example
X1...X4
X1...X4
English – 9