Sanyo DC-PT100 Manual De Instrucciones página 13

Track search [VCD] [CD]
Press the number buttons during play or in the stop mode, then press the
a (Play) button. Play starts from the selected track.
Time search
[DVD]
1. Press the SHIFT + SEARCH MODE buttons three times during play.
The time search screen appears.
Example:
Time Search
2. Press the number buttons to enter the time.
Example:
20 minutes 5 seconds
1 hour 4 minutes 35 seconds
- If you make a mistake, press the CLEAR button.
3. Press the a (Play) button. Play starts from the searched time.
[VCD] [CD]
1. Press the SHIFT + SEARCH MODE buttons once during play. The
time search screen appears.
2. Press the number buttons to enter the time.
3. Press the a (Play) button. Play starts from the searched time in the
track.
Fast play
Press the c or d button repeatedly to select the fast speed forward or
reverse play.
[DVD] [VCD]
"c 1", "c 2", "c 3", "c 4" or "d 1", "d 2", "d 3", "d 4"
[CD]
"c 1", "c 2" or "d 1", "d 2"
Press the a (Play) button to return to normal play.
Slow-motion play
[DVD]: Forward/Reverse slow play, [VCD]: Forward slow play only
Press the F.SLOW or R.SLOW
forward or reverse slow speed play.
" 1", " 2", " 3", " 4" or "
Press the a (Play) button to return to normal play.
Note:
The sound is muted during fast play or slow-motion play in DVD/VCD.
Still picture (Pause)
[DVD] [VCD]: Still picture mode, [CD]: Pause mode
Press the k button during play.
Press the a (Play) button to return to normal play.
Note: The sound is muted.
Frame by frame advance play [DVD] [VCD]
Press the k button during still play. Each time the button is pressed, the
picture advances one frame.
Press the a (Play) button to return to normal play.
Note:
- The sound is muted.
- Frame play is operative in forward mode only.
--:--:--
Press 2, 0, 0 then 5.
Press 1, 0, 4, 3 then 5.
button repeatedly to select the
1", " 2", " 3", " 4"
Picture zoom (Pin point zoom) [DVD] (Fig. 16)
1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play.
The pin point guide screen appears.
1 2 3
4
5 6
7 8 9
- If you quit the screen, press the SHIFT + 3 ZOOM buttons.
2. Press the 4, a, 5 or b button, then the ENTER, or press the number
button to select the zoom point.
The screen is magnified. "
If necessary, press the 4, a, 5 or b button repeatedly to move the
screen.
3. Press the SHIFT + 3 ZOOM buttons again. The screen is magnified
more than " 1". " 2" appears briefly.
4. Press the SHIFT + 3 ZOOM buttons to return to the original screen.
Note:
Picture zoom may not work on some discs.
Viewing from a desired camera angle (Multi-Angle)
[DVD] (Fig. 17)
Some DVD discs may contain scenes which have been shot simultaneously
from a number of different camera angles. The jacket or case of discs that
are recorded with angles will be marked.
Example:
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the SHIFT + 1 ANGLE buttons repeatedly until the desired
angle appears.
Example:
3/5
Angle replay [DVD]
During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons.
The unit skips back to last approximately 10 seconds, changes it to the
next camera angle and plays it, and continues play. (If desired, press the
buttons again.)
1" appears briefly on the screen.
12