5.8 Storing your milk
•
Do not store your milk in the Cup. Pour your milk
into a sealed container of your choice. Before storage,
label with date and time, and immediately place
in a fridge, freezer, or cooler bag with ice packs
•
While you are preparing to pour your milk the Cup
can be laid fl at on a dry surface with the
Nipple Tunnel pointing up
•
For information on storing your breast milk, refer to
https://www.cdc.gov/breastfeeding/recommendations
/handling_breastmilk.htm
5.9 How to store Elvie Stride
Short-term storage
•
Recharge immediately after fi nishing your pumping
session if the Battery Light is on
•
Between sessions, please store your Elvie Stride out
of direct sunlight and ensure the washable parts are
clean and dry. Keep out of reach of children
Tip: It's important that the components are kept dry in
storage because mold may develop if moisture is present.
Long-term storage
•
The washable parts will require cleaning and drying
before long-term storage and should be stored away
from direct sunlight to avoid discoloration
•
If stored at minimum or maximum storage temperature
(see
Product specifi
cations), please allow 24 hours for
the pump to reach normal operating temperature
before use after removing it from storage
24
6. Troubleshooting
Alerts and warnings
•
Intensity Lights fl ashing – Elvie Stride is paused
•
Battery Light fl ashes red four times – battery empty
•
All Intensity Lights illuminated –
maximum intensity level reached
•
All lights fl ash then turn off – technical error
(Contact Customer Care)
Factory reset
To perform a factory reset:
1.
Turn Elvie Stride on
2.
Press and hold both
3.
Play/Pause and Intensity Lights will fl ash while
Elvie Stride is resetting
4.
All lights and Elvie Stride will then turn off
Re-attaching the Tube into the Cap
1.
Insert the Short Tube
into the Cap
2.
Push the Short Tube
onto the Tube Port
3.
Once secure, ensure there
are no kinks or bends in tubes
simultaneously for fi ve seconds
Tube Port
25