ELVIE stride Instrucciones De Uso página 6

• Only use Elvie Stride for its intended use as
described in this manual
• Do not use Elvie Stride while sleeping or overly drowsy
• Always break the seal around your nipple before
removing Elvie Stride from your breast
• Do not wear Elvie Stride when not pumping
• Elvie Stride and its components are not heat resistant.
Keep away from heat sources
• Elvie Stride uses Bluetooth technology. Please follow
airline rules for the use of portable electronic devices
when flying. Furthermore, high altitudes, including
while in a pressurized aircraft cabin, will affect the
performance of Elvie Stride
• Portable and mobile frequency communications
equipment can affect the Hub
• Please note that the Pump with Elvie app is
not required to use Elvie Stride. In the case of
disconnection from the app all pump controls are still
accessible via the device
Precautions
• Always ensure all parts are completely dry before
assembling. Any liquid left on the Diaphragm risks
being sucked into the Hub, which could cause
product failure
• Do not use harsh chemicals to clean the Breast
Shield, Cup Front, Cup Seal, Valve or Diaphragm
• Do not place the Hub in the fridge or freezer
8
• Do not expose Elvie Stride or its components
to direct sunlight
• Wash your hands thoroughly with soap and water
before touching Elvie Stride, its components or your
breasts. Avoid touching the inside of the Cup Fronts
and Breast Shields
• Only use drinking-quality tap water or bottled water
for cleaning components that come into contact
with milk
• Contact your healthcare professional if you express
minimal or no milk, or if expression is painful
• For further assistance with correct Breast Shield sizing
and comfort, please see a lactation consultant or
breastfeeding specialist
• Elvie Stride will not work when connected to the
charger; always disconnect Elvie Stride from the
charger and close the Charging Port
• If stored at minimum or maximum storage
temperature (see Product
removing from storage, please allow 24 hours
for the pump to reach normal operating
temperature before use
• Do not attempt to reset the Hub during use
• Take extra care when using Elvie Stride in the
vicinity of children
Please visit elvie.com for troubleshooting advice, including alerts,
warnings and how to factory reset Elvie Stride.
Please keep a copy of these instructions for future reference.
specifications), when
9