Heating Mode - Elnur Gabarron CCN-2000 Instrucciones De Instalacion Y Uso

• Press
setting, with the screen display:
• Press and
• Press
setting, with the screen display:
• Press and
• Press to confirm all settings
Note: The clock and calendar will be reset to factory default
if without power supply.
Press to enter mode selection. By pressing
runs in a continuous cycle as below:
• Comfort mode: Press
from 10ºC-35ºC.
• ECO mode: Press
6ºC-31ºC.
Note: ECO mode=Comfort mode - 4ºC
• Anti-frost mode: the screen display
is 7ºC. The temperature can't be adjusted.
• P1/P2/P3: Pre-set heating program.
Note: If the clock and day setting are not finished, the first
time to enter P1/P2/P3 program setting, it is requested to
set day and clock setting in advance.
to confirm day setting and enter the clock hour
to set the current hour
to confirm hour setting and enter the minute
to set the current minute

Heating mode

.
.
and to set the temperature
and to set the temperature from
. The target temperature
, heating mode