Dash Disassembly - Metra 95-6522B Instrucciones De Instalación

1. Unclip the top edge of the trim
panel below the steering column
(it does not have to be removed).
2. Remove the (1) Phillips-head
screw from below the right
A/C vent. (Figure A)
3. Unclip and remove the dash
trim panel. (Figure A)
4. Remove the (4) Philips screws that
secure the radio. Disconnect and
remove the radio.
5. Remove the (4) Philips screws that
secure the a/c controller (save
these screws they will be reused).
6. Remove the (4) Phillips screws that
secure the factory pocket (save
these screws they will be reused).
Continued on next page

Dash Disassembly

(Figure A)
95-6522B
(Figure B)
2
A/C controller
Pocket