12
13
14
16
19
21
20
25
- Remove the passenger footrest unit (12).
- Remove the right screws (13), (14) and (15) and remove the right rear
frame.
15
- Remove screws (16) and (17) and remove the cable cover (18).
18
- Remove the upper screw of the left passenger footrest unit and pull out
the pin (19).
17
- Route the wiring harness forward (see Figure A).
- Remove the air filter box lid (20).
- Remove the expanding rivets and take off the lower rear panel (21).
A
- Release the clamp (22) and feed out the intake funnel rubber piece (23)
and vent (24).
- Remove the air filter box (25).
23
22
24