Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.- Connect the IDE cable
Connect the IDE cable
to your hard disk making
sure that the tab located in
the middle of the cable
matches with the slot on
the hard disk.
3.- Connect the power
Connect the power
cable to your hard disk.
4.- Place the hard disk inside
Place the hard disk inside
the recorder
5.- If you want to protect the hard
disk, use the keys to close the
removable rack
al lea este instructivo para
We recommend using the HDD
evitar cualquier mal funcio-
in Slave or Cable Select mode
so make sure jumper on the
namiento. Guárdelo para
hard disk are is in Slave mode or
futuras referencias.
cable select mode
ENGLISH-10
Publicidad
Capítulos
Tabla de contenido
