j) Restore factory default
This option will restart the recorder default options. Re member, all
changes made by the user will be erased after this process.
If you established a password and you forget it, press Pause button 10
times, this process will restart the system.
If you are in recording mode, power the recorder off, and remove the HD.
Then, power on the recorder and press Pause button 10 times.
NTSC / PAL OUTPUT SELECT
Power off the recorder and unplug the AC power adapter. Then, remove
the case and locates the jumper 10, remove it and select PAL or NTSC
according your needs.
L
ENGLISH-22