Steren CCTV-940 Manual De Instrucciones página 50

Use movement arrows to select one of the options.
Press SEL / EDIT button to enter
a) Camera select
The recorder can display up to 4 cameras in one screen (Quad Mode),
but you can configure which camera or cameras are enabled to
visualize.
Press SEL / EDIT to change the parameters or press Channel buttons
(CH1, CH2, CH3, CH4) to configure each channel,
separately. If a channel is not in use, the system will display OFF.
b) Record Select
The recorder can record up to 4 signals from the cameras in one screen
(Quad Mode), but you can configure which camera or cameras are
ENGLISH-14