Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
1.- Locate the BNC input jacks on the rear of the video recorder.
2.- Connect the #1 camera in the BNC input jack labeled as CH1. Use
this same process for up to four cameras if you wish.
3.- Connect a monitor to one of the BNC output jacks labeled as VIDEO
OUTPUT
CAMERA 2
CAMERA 3
CAMERA 1
CAMERA 4
TO AC/DC ADAPTER
MONITOR
CAMERA 3
4.- Plug an AC power adapter into the DC power connector, then connect
Plug an AC power adapter into the DC power connector, then connect
it into an AC outlet.
ENGLISH-11
Publicidad
Capítulos
Tabla de contenido
