Remote Control Setup - THOMSON DS120DABCD Modo De Empleo

13. Skip to the next track or previous track
Tune to a radio station
Press and hold the button to search within a track / USB file / SD file
14. Select the EQ setup
15. Info button
16. Dimmer for brightness setting
17. Adjust the volume level
18. Select the sleep timer setup
19. USB
20. USB Charge
21. CD tray
22. Audio in jack
23. SD port
24. LCD display
Power
CAUTION
• Risk of product damager! Make sure that the power voltage corresponds to the
voltage printed on the back label.
• Risk of electric shock! When you unplug the AC power cord always pull the plug
from the socket. Never pull the cord.
• Before connecting the AC power cord, ensure you have completed all other
connections.
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply
socket and switch on if applicable.
Auto standby
When playing media from a connected device, the Tower automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.

Remote Control Setup

Requires 2 AAA batteries
Use alkaline or manganese battery.
Install the battery so that the poles (+ and -) align with those in the remote control.
Close the battery compartment.
Note: Dispose of used batteries properly. Batteries contain chemical substances, so if you are not
going to use the remote control for a long time, you should remove the battery.
ATTENTION: Danger of explosion if batteries are not inserted correctly
- EN 4 -