THOMSON DS120DABCD Modo De Empleo página 20

2. Press the VOL+/VOL – to adjust the volume
For MP3 disc:
1. Press / to select an album or a folder.
2. Press /
3. Press the VOL+/VOL – to adjust the volume.
USB/SD
Reduce the volume and connect the USB/SD device to the USB port or SD port.
Hold the main unit when connecting or disconnecting the USB device.
1. Press [Source] repeatedly to select "USB" or "SD"; the USB or SD media will auto play.
2. Press / to select the folder, press
3. Press VOL+/VOL – to adjust the volume.
USB Charge
The USB Charge port output power is 5V/1A max.
Bluetooth®
You can connect and play an audio device wirelessly through Bluetooth®.
Setup
• Switch on the Bluetooth® feature of the device and put the device near the system.
• Read the operation instructions of the device for details.
1. Press [SOURCE] repeatedly to select the Bluetooth mode; the ''PAIRING" message blinks.
2. Select "DS120DABCD" from the device's Bluetooth menu.
If prompted for a passkey, input "0000".
The device connects with this system automatically after pairing is complete.
The name of the connected device is shown for a few seconds.
3. If this system is connected to a Bluetooth device, press and hold the [
it, until the [NO BT] message is shown.
4. Start playback on the device.
5. Press [ ] or [
6. Press the [VOL+/VOL-] buttons or rotate the VOLUME knob to adjust the volume.
Audio-In
You can play from an external audio device such as an MP3 player through this unit.
Line-In Jack (Requires a 3.5mm Cable)
1. Connect a 3.5mm cable to the line-in jack on the top panel. Connect the other end of the
3.5mm cable to an MP3 player or other audio device.
2. Repeatedly press the [SOURCE] button to select Line-In Mode.
3. Use the controls on the connected device to begin playing connected audio.
DAB Radio
Carefully extend the telescopic aerial.
Auto Scan
1. Press the [SOURCE] to select "DAB MODE".
If this is the first time the unit has entered DAB Mode, it will automatically start an 'Auto
Scan' to search for available stations. (Once DAB Mode has been used before, the unit will
automatically select the previously played station)
2. Press [ENTER] button to automatically start auto scan to search for available station.
During the scanning process, the lower line of the display shows a bar graph indicating the
progress of the scan.
to select a track or a file.
] to skip track.
/ to select track.
- EN 6 -
] button to disconnect