THOMSON DS120DABCD Modo De Empleo página 23

3. Press or
up or down by 50 kHz.
4. When the waveband end is reached, the radio will recommence tuning from the opposite
waveband end. If no stations are found, please ensure the aerial is extended and test the
reception by doing another auto scan in a different location.
Menu
1. Scan Setting
In FM mode, press [MENU], enter the FM menu setting, then press
setting], then press [ENTER] to select the sensitivity setting:
1.1. All stations: ~15dB
1.2. Strong stations only: ~19dB,
2. Audio Setting
2.1. Stereo allowed:
2.2. Forced mono
2.3. System (FM system), same DAB system setting.
3. PRESET:
3.1. Preset Recall (Choose the Station):
Press [ENTER], tune to the station stored in preset memory.
to tune to a station. Each press of the tuning button will change the frequency
- EN 9 -
or to select [Scan