Cleaning & Maintenance; Cleaning And Maintenance Instructions - Continental LCA85BYI0 Manual De Usuario

Cleaning & Maintenance
End of a wash program
• The washing machine buzzer will signal
at the end of any program in order to re-
mind you to take the load out of the ma-
chine.
• After the signal, the washer turns off. The
display and all lights will be off.
• Close the water supply to the appliance.
Unplug the power cord when not in use
to prevent water leakage or a fire.
Cleaning
After each use, wipe off the water and dirt
on the surface of the washer using a soft
cloth. Do not use detergent, solvents or
other chemicals as this will result in dam-
age to plastic
parts.
Clean the water inlet valve
After a period of use, the water inlet mesh
filter could be clogged with debris, and
should be cleaned according to the follow-
ing steps:
1. Turn on the washer and close the water
supply tap.
2. Let the washer run for 5 seconds so wa-
ter flows into the tub through the water
inlet hose; then turn off the power.
3. Remove the water inlet hose and clean
the mesh filter, then replace the water
inlet hose.
40
Clean the filter (on magic filter
models)
Regularly clean the filter according to the
following steps:
1. Take out the lint filter.
2. Open the filter and wash it clean in run-
ning water.
3. Replace the filter.
Clean the filter (on normal filter
models)
Regularly clean the filter according to the
following steps:
1. Take out the lint filter.
2. Open the filter and wash it clean in run-
ning water.
3. Replace the filter.