SATA 400 Instrucciones De Servicio página 78

Operating instructions SATA filter 400
EN
• Keep all enclosed documents and pass on the filter together with
these documents only.
6.2. Filter specific safety instructions
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Use, cleaning and maintenance by skilled personnel only!
• Never use the filter when it is damaged or when components are
missing!
• Check and, if necessary, repair the filter on a regular basis!
• Put filter out of operation immediately when it is damaged!
• Never carry out unauthorised or technical modifications on the filter!
• Use original SATA spare parts and accessories only!
6.3. Use In Explosive Areas
The filter is approved for use in potentially explosive atmospheres of ex-
zone 1 and 2. Heed the product ID.
The SATA filters 400 fulfil the principle safety requirements of Directive
2014/34/EU in terms of design, construction and type. The SATA filters
400 fulfil the principle safety requirements of Directive 2014/34/EU in terms
of design, construction and type.
7. Assembly
7.1. SATA filter 400
• Install mounting bracket [1-2] on the filter
• To ensure proper function of the condensate drain valve, please mount
the filter with screws to the wall vertically.
• Connect air inlet G ½" (internal thread) to compressed air line with
detachable bolted connection
78
Warning! Attention!
Warning! Attention!