Storage, Care And Maintenance Instructions - SPORTSTECH WBX300 Manual De Instrucciones

6. STORAGE, CARE AND MAINTENANCE INSTRUCTIONS

1.Release the air and remove the fin.
2.Clean and inspect your WBX300 / 320 as well as the accessories (including paddle) after each use.
Rinse everything to make sure any residue or salt residue (when used in salt water) is removed. Use
mild soapsuds or fresh water.
IMPORTANT: Do not use detergents or silicone-based cleaners!
3. Leave the valve open while rolling up the WBX300 / 320 in the direction of the valve. Close the valve
to prevent it taking in any of moisture and dirt.
4.Please store your WBX300 / 320 in a sufficiently spacious, clean and dry place.
Temperature fluctuations and other harmful factors have been taken into consideration. Store it without
air, rolled up. Protect it from rodents.
5. Disassemble the paddle and store the individual parts separately.
The SUP boards WBX300 / 320 are of the highest quality and very durable, but avoid the following in
any case:
• The WBX300 must not come in contact with sharp or hot objects.
• Do not leave your WBX300 / 320 in the sun for an unnecessarily long time.
PROBLEMS AND TROUBLESHOOTING
PROBLEM
WBX300/320 loosing air
Repairs
The scope of delivery includes a repair kit / PVC patch for repairing small holes. Most leaks can be
fixed in a few minutes.
CAUSE
Temperature increase
or decrease
Valve cover was
incorrectly turned on
Loose valve
Hole
28
SOLUTION
Pressure adjustment
Correct the valve cover
Tighten the valve
Repair