Sunjoy A106000904 Manual De Instrucciones página 6

Fig.5-1: Insert the connectors 2 (F1) to the top arc beams (B), secure with bolts (AA) and washers (BB/LL), tighten
with wrench (ZZ).
Fig.5-2: Attach the ferrule 1 (O1) to the assembled top arc beams (B) and connector 2 (F1).
Fig.5-3: Attach the other top arc beams (B) to the top arc beam assemblies (B/F1/O1) and secure with bolts (AA) and
washers (BB/LL), tighten with wrench (ZZ).
Fig.6: Connect the assembled top arc beams (B) with the beam decorations (G2) through the holes of assembled top
beams 1 (C) using bolts (HH), washers (BB/LL) and nuts (GG), tighten with wrench (ZZ) .
Fig.7: Attach the support bars 1 (H) to the posts (A3/A4) and the top beams 1 (C) using bolts (HH) and washers
(BB/LL), tighten with wrench (ZZ). Repeat this step for attaching the supports 2 (I) to the posts (A3/A4) and the top arc
beams (B) using bolts (HH) and washers (BB/LL), tighten with wrench (ZZ) .